中文站
EnglishProduct Name：
Ethylene, tetrafluoroethylene copolymer
Alias：
Ethylene Tetra Fluoro Ethylene
Performance：
ETFE is a kind of crystalline polymer with melting point of 265 ~ 270 ℃, density of 1.73 ~ 1.75g/cm3, long-term service temperature of - 60 ~ 170 ℃, good chemical resistance, heat resistance, wear resistance, radiation resistance, impact resistance and point insulation properties, especially mechanical properties, strength and elongation are better than PFA and FEP
Technical
Uses
Notices
Packaging / Transportation / Storage
It is suitable for high temperature resistant wires and cables used in electronic and electrical industry, high frequency electronic equipment transmission lines, installation lines, electronic computer wire insulation, aviation wires used in national defense industry, oil mine detection and oil pump cables, fire-proof wires and cables used in metallurgy and construction.
1. Pay attention to moisture-proof, because the production and processing place is in Guangdong, the weather is relatively humid, it is recommended to dry at 100 ℃ - 150 ℃ for more than 2 hours before use. If the production date is from January to may (Meiyu weather), the drying time should be extended to 4 hours.
2. This product cannot be mixed with other products. Please clean the equipment before use.
3. This product has electrostatic attraction. Keep it clean and dry during transportation and storage. Do not expose it to the air for a long time when opening it for use, so as to prevent dust and other impurities from mixing in.
4. Avoid processing above 425 ℃ to prevent toxic gas from decomposition.
2. This product cannot be mixed with other products. Please clean the equipment before use.
3. This product has electrostatic attraction. Keep it clean and dry during transportation and storage. Do not expose it to the air for a long time when opening it for use, so as to prevent dust and other impurities from mixing in.
4. Avoid processing above 425 ℃ to prevent toxic gas from decomposition.
1. The net weight of each bag is 25kg. It is packaged in two layers with environmental PE material.
2. Keep clean, dry and cool during storage and transportation, pay attention to package damage and prevent impurities from mixing in.
3. This product is non-toxic, flame retardant, non explosive, non corrosive, and transported as non dangerous goods.
2. Keep clean, dry and cool during storage and transportation, pay attention to package damage and prevent impurities from mixing in.
3. This product is non-toxic, flame retardant, non explosive, non corrosive, and transported as non dangerous goods.