中文站
EnglishProduct Name：
Polyvinylidene fluoride granules
Alias：
F2；F26；PVDF
Performance：
The relative density of PVDF is 1.75 ~ 1.78, the glass transition temperature is - 39 ℃, the embrittlement temperature is below - 62 ℃, the melting point is 144 ℃, and the thermal decomposition temperature is above 320 ℃. The long-term use temperature is - 40 ~ + 125 ℃, the processing temperature range from melting point to decomposition temperature is wide, the processing temperature is low, the melting viscosity is small, and it is easy to process. Mechanical strength is the most superior product in fluororesin, and it can maintain good strength under certain temperature and pressure. High tensile strength. Good impact strength, good toughness, high hardness, good wear resistance, creep resistance is also one of the best fluororesins, with outstanding characteristics of UV resistance and weather resistance, and its film will not crack after one or two decades of outdoor storage. The radiation resistance of the films is also outstanding, and the properties of the films do not decrease seriously after 3 × 108 r-ray irradiation. Excellent electrical insulation.
Technical
Uses
Notices
Packaging / Transportation / Storage
Wire insulation, sheath, injection molded parts, pipe fittings, valves, plates (molded or extruded), bars, etc
1. Pay attention to moisture-proof, because the production and processing place is in Guangdong, the weather is relatively humid, it is recommended to dry at 100 ℃ - 150 ℃ for more than 2 hours before use. If the production date is from January to may (Meiyu weather), the drying time should be extended to 4 hours.
2. This product cannot be mixed with other products. Please clean the equipment before use.
3. This product has electrostatic attraction. Keep it clean and dry during transportation and storage. Do not expose it to the air for a long time when opening it for use, so as to prevent dust and other impurities from mixing in.
4. Avoid processing above 425 ℃ to prevent toxic gas from decomposition.
2. This product cannot be mixed with other products. Please clean the equipment before use.
3. This product has electrostatic attraction. Keep it clean and dry during transportation and storage. Do not expose it to the air for a long time when opening it for use, so as to prevent dust and other impurities from mixing in.
4. Avoid processing above 425 ℃ to prevent toxic gas from decomposition.
1. The net weight of each bag is 25kg. It is packaged in two layers with environmental PE material.
2. Keep clean, dry and cool during storage and transportation, pay attention to package damage and prevent impurities from mixing in.
3. This product is non-toxic, flame retardant, non explosive, non corrosive, and transported as non dangerous goods.
2. Keep clean, dry and cool during storage and transportation, pay attention to package damage and prevent impurities from mixing in.
3. This product is non-toxic, flame retardant, non explosive, non corrosive, and transported as non dangerous goods.